Sand and dust environmental test chamber simulates extremely sandy, dusty and desert-like environments to test product’s performance (seal integrity) in accordance with related IEC, ASTM, and ISO standards.
Sand and Dust Test Chamber
Description
ATMARS sand and dust test chamber is capable of simulating dry sand and dust conditions. The particles enter cracks, crevices, bearings, and other connections, causing various types of damage responsible for equipment corrosion and malfunctions. ATMARS sand and dust test chamber is used to check the reliability of electronics, automotive parts, and components in atmospheric effects from dry sand and dust (fine sand).
| Specifications of ASD series rain test chambers *Performance is based on ambient temperature +20℃or circulating water temperature +25℃, no-load. | ||||||
| Model | ASD-500 | ASD-800 | ASD-1000 | ASD-1500 | ASD-2250 | |
| Performance | Mesh Diameter | 50um | ||||
| Wire Spacing | 75um | |||||
| Temp. Range | RT +5℃-+80℃ | |||||
| Temp. Deviation | ±1.0℃ | |||||
| Dust Dosage | 2kg-4kg/m³ | |||||
| Air Velocity | ≤2m/s | |||||
| Dust Concentration | 2kg/m³ | |||||
| Vacuum | Negative pressure 2kPa | |||||
| Vibration Time | 1s-99h（adjustable） | |||||
| Test Time | 1s-99h（adjustable） | |||||
| Blowing Time | 1s-99h（adjustable） | |||||
| Working Volume | 512L | 800L | 1000L | 1500L | 2250L | |
| Interior Size (W*D*H)mm | 800 | 800 | 1000 | 1000 | 1500 | |
| 800 | 1000 | 1000 | 1500 | 1500 | ||
| 800 | 1000 | 1000 | 1000 | 1000 | ||
| Exterior Size (W*D*H)mm | 1030 | 1030 | 1230 | 1230 | 2050 | |
| 920 | 1120 | 1120 | 1620 | 1800 | ||
| 1660 | 1860 | 1860 | 1860 | 1900 | ||
| Material | Interior / Exterior | Baked stainless steel / Stainless steel (SUS 304) | ||||
| Control System | Controller: Touch Screen And PLC Controller | |||||
| Vacuum System | Pressure gauge, air filter, pressure regulating FRL, connecting pipe, and vacuum | |||||
| Blower | Hermetic alloy low noise type motor with multileaf centrifugal fan | |||||
| Heater | Stainless steel MICA plate heating sleeve | |||||
| Specimen Socket | Dustproof socket AC 220V 16A | |||||
| Accessories | 1x viewing window; 1x cable access port; 1x internal light; 4x casters & leveling legs; 1x power cable; 5KG talcum powder | |||||
| Protection Devices | Leakage, short-circuit protection Overheat protection Over temp. protection | |||||
| Environmental Requirement | Temperature：20℃~30℃，Humidity：50%RH~70%RH | |||||
| Power Requirement | 0.5KW | 1.0KW | 1.2KW | 2.5KW | 3.5KW | |
| Power Supply | AC 380V (1±10%) (50 ±0.5）Hz 3Phase 4 Wire plus earth wire | |||||
| ▲Custom options available | ||||||
You must be logged in to post a review.
Reviews
There are no reviews yet.