SEARCH WHAT YOU WANT
Temperature / Humidity
Bench-top Environmental Chambers
Temperature and humidity Test Chambers
Battery explosion-proof test chamber
Walk in chamber
AGREE Chambers
Thermal Vacuum Chamber
Thermal / Stress
Thermal Shock Chamber
ESS Test Chambers
HALT chamber
Altitude Test Chambers
Life/Aging
Explosion-Proof Oven
Inert Gas Oven
Precision Industrial Oven
Salt Spray Test Chambers
Sand and Dust Test Chambers
Rain Test Chambers
Ultraviolet Aging Test Chambers
Walk-In Aging Test Room
Microwave Digestion System
Other Environments
Double-arms Drop Test Machine
Single-arm Drop Test Machine
Impact Testing Machine
Simulation Car Transport Vibration Tester
High And Low Temperature Tension Test Machine
Battery Heavy Impact Test chamber
Battery Nail Penetration And Squeezing Combined chamber
Battery Internal Short Circuit chamber
Battery Washing Test chamber
Battery Rotation Test chamber
Pharmaceutical Stability Chambers
Product Presentation
ATMARS Temperature test chamber is widely used in industry sectors like electronics, automotive, aerospace, marine and so on to test the performance indicators of the parts and components. In accordance with the national standard or user-defined requirements , Atmars test chamber conduct environmental simulation to test the physical or other related characteristics of the products under high or low temperature. To check the performance of the product while undergoing temperature testing. So as to be used for product design, improvement, identification and factory inspection.
ATMARS Temperature test chamber is widely used in industry sectors like electronics, automotive, aerospace, marine and so on to test the performance indicators of the parts and components. In accordance with the national standard or user-defined requirements , Atmars test chamber conduct environmental simulation to test the physical or other related characteristics of the products under high or low temperature. To check the performance of the product while undergoing temperature testing. So as to be used for product design, improvement, identification and factory inspection.
Specification
|
Specifications of Bench-top Series Rapid temp. changing(humidity) test chamber |
|
|
Model |
AT-30C |
|
Temp.Range |
-60℃to +150℃ |
|
Temp.Uniformity |
≤2.0℃（no load) |
|
Temp.Fluctuation |
≤±0.5℃ |
|
Temp.Deviation |
≤±2.0℃(no load) When the temp.≤100℃ |
|
Analytical Accuracy |
0.01℃ |
|
Heat Up Time |
From -60℃to +150℃about 70 min, 3.0℃/min |
|
Cool Down Time |
From 20℃to -60℃about 80 min, 1.0℃/min |
|
Interior Size |
W300*H400*D250mm (customizable ) |
|
Exterior Size |
W480*H830*D1060mm (customizable ) |
|
Interior Material |
Stainless Steel Plate（SUS 304); Thickness: 1.0 mm |
|
Exterior Material |
Baked painting steel or stainless steel(SUS304); Thickness: 1.2 mm |
|
Insulation Material |
Rigid polyurethane foam and glass fiber wool |
|
Insulation Thickness |
80mm |
|
Viewing Window |
Size: W210*H370; Material: Multi-layer hollow electrothermal coated glass |
|
Cycling System |
Stainless steel elongated shaft waterproof and heat-dissipating motor; SIROCCO FAN |
|
Cable Port |
Port Φ50mm one left and right |
|
Heater |
Nickel alloy wire heater (SSR) |
|
Noise Level |
≤68dB（1 meter away from the center of the gate, measured at a height of 1.2 meters） |
|
Condenser |
Automatic heat dissipation fin type with cooling motor(air cooling) |
|
Evaporator |
High -performance fin type automatic load capacity adjustment |
|
Refrigerant Flow Control |
The refrigeration system that automatic adjust the energy output control |
|
Vibration & Noise Reduction |
Installation of rubber pads at the bottom of the compressor |
|
Setting Range |
Temperature requirement: -70 to +150℃; Adjustable temperature working range(upper limit:+5℃,lower limit:-5℃) Humidity requirement:0-100%RH. |
|
Controller |
ATMARS programmable AT-5166 color LCD with PID control parameters setting |
|
Specifications of Bench-top Series Rapid temp. changing(humidity) test chamber |
|
|
Model |
AT-30C |
|
Temp.Range |
-60℃to +150℃ |
|
Temp.Uniformity |
≤2.0℃（no load) |
|
Temp.Fluctuation |
≤±0.5℃ |
|
Temp.Deviation |
≤±2.0℃(no load) When the temp.≤100℃ |
|
Analytical Accuracy |
0.01℃ |
|
Heat Up Time |
From -60℃to +150℃about 70 min, 3.0℃/min |
|
Cool Down Time |
From 20℃to -60℃about 80 min, 1.0℃/min |
|
Interior Size |
W300*H400*D250mm (customizable ) |
|
Exterior Size |
W480*H830*D1060mm (customizable ) |
|
Interior Material |
Stainless Steel Plate（SUS 304); Thickness: 1.0 mm |
|
Exterior Material |
Baked painting steel or stainless steel(SUS304); Thickness: 1.2 mm |
|
Insulation Material |
Rigid polyurethane foam and glass fiber wool |
|
Insulation Thickness |
80mm |
|
Viewing Window |
Size: W210*H370; Material: Multi-layer hollow electrothermal coated glass |
|
Cycling System |
Stainless steel elongated shaft waterproof and heat-dissipating motor; SIROCCO FAN |
|
Cable Port |
Port Φ50mm one left and right |
|
Heater |
Nickel alloy wire heater (SSR) |
|
Noise Level |
≤68dB（1 meter away from the center of the gate, measured at a height of 1.2 meters） |
|
Condenser |
Automatic heat dissipation fin type with cooling motor(air cooling) |
|
Evaporator |
High -performance fin type automatic load capacity adjustment |
|
Refrigerant Flow Control |
The refrigeration system that automatic adjust the energy output control |
|
Vibration & Noise Reduction |
Installation of rubber pads at the bottom of the compressor |
|
Setting Range |
Temperature requirement: -70 to +150℃; Adjustable temperature working range(upper limit:+5℃,lower limit:-5℃) Humidity requirement:0-100%RH. |
|
Controller |
ATMARS programmable AT-5166 color LCD with PID control parameters setting |
Previous:No more data
FEEDBACK