1. Replacement of wick
*If the wick become dirty and stiff, or after a high temp control test, it must be replaced before another temperature and humidity control test.
*The wick should be replaced every three months. When replacing the wick, the probe should be wiped with clean cloth.
2. Inspection and adjustment of the wet bulb water level
*The water level in the tank should not be too high. Either overflow or too low will lead to wick's abnormal water absorbing and affect the accuracy of the wet bulb. Water level should remain about 60% full in the tank. If you need to adjust the water level in the tank, you can adjust the height of the water box (adjust the screws on both sides).
3. Condenser Cleaning
*The condenser should be maintained monthly. A vacuum cleaner can be used to remove away the dust on the condenser cooling copper sheet, or use high-pressure air flow to clean the dust.
4. Check over-temperature protector of the drying bulb
*When the test chamber is running, check whether the setting of dry and wet bulb over-temperature protection is between the highest temperature point plus 15℃～20℃.
*If the temperature inside rise to the over-temperature protection point, the heater power supply will stop instantly. The test chamber controller will show failure situation immediately, the buzzer will alarm.
*In case of long time running and unattended, please check the over-temperature protector to ensure the set is properly. (The wet bulb over-temperature protector setting should be taken physical as standard.)
5. Internal and external cleaning and maintenance
*Clear away the internal clutter and impurities of the test chamber before operation.
*The power distribution room should be cleaned at least once a year. A vacuum cleaner can be used to remove away the dust in the cabinet. The external of the machine should be washed more than once in a year. Soapy water can be used to scrub the outer shell.
6. Humidifier check and maintenance
*The water in the humidifier should be replaced once a month to ensure the water clean. Humidification water pan should be washed once a month to ensure smooth water flow.