Temperature Humidity Chambers

Drive in / Walk in Chambers

HALT HASS / ESS Chambers

Thermal Shock Chambers

Altitude Chambers

AGREE Vibration Chambers

Stability Chambers

Speciality Climatic Chambers

Vibration Test Systems

Mechanical Testing Equipment

Battery Testing Equipment

Laboratory / Industrial Ovens

Home >  Equipment > Vibration Test Systems

Electrodynamic Shaker

Electromagnetic shaker or vibration test chamber is designed for early failure discovery, structure strength test and simulation of actual working condition assessment.

Equipment introduction
Related equipment


Electrodynamic Shaker Test System provides a testing platform for transportation simulation, mechanical shock, mission profile, Environmental Stress Screening (ESS), and more. With dynamic and enhanced performance in displacement, velocity, acceleration, and force, Electrodynamic Shakers accurately simulate a wide range of conditions that can help improve product and test quality and reliability.

An ATMARS Vibration Shaker can test in a vertical or horizontal orientation; utilize a fixture, sliptable, or head expander; and interface with an ATMARS's AGREE Environmental Test Chamber. From running random and sine-to-shock, sine-on-random, and random-in-random tests, our vibration test systems will meet your specific vibration testing needs.
Table 1:

Specifications of Low Frequency Eletrodynamic Shaker_ATMARS.jpg
Table 2:
Specifications of High Frequency Eletrodynamic Shaker_ATMARS.jpg
Table 3:
Specifications of Big Displacement Eletrodynamic Shaker_ATMARS.jpg


ATMARS armatures are lightweight and durable for maximized acceleration levels. Radial-finned design directs uniform forces through a bonded structure to the specimen mounting surface. This mounting surface incorporates standoffs arranged on concentric bolt circles that minimize thermal transfer and support long-term reliability testing. Custom wound armatures are available for specific performance.

Head Expanders  (Round or Square) and (Head) Plates (Round or Square) increase the mounting area for attaching fixtures and products to an electrodynamic shaker table. Various insert patterns are available. And multiple items can be tested at the same time, decreasing total test cycle time. In addition, with Guided Head Expanders and Added Load Support, heavy payloads with large foot prints can be safely mounted and tested on the shaker, minimizing the risk of damage to the shaker suspension system. ATMARS head expanders and head plates are designed for proper stiffness (i.e. gusseted and welded) and are made of durable while light-weight magnesium alloys, providing high strength-to-weight ratio. Head expander weight is reduced where practical and features corrosion protection. 

Head Expander Shapes_ATMARS.jpg

Specifications of Option Head Expander_ATMARS.jpg


ATMARS electrodynamic shakers have the option of being used with sliptables and a trunnion allowing vibration tests to be performed in the horizontal axis by rotating the electrodynamic shaker 90°. Our single piece table construction with a solid trunnion limits the relative body motion of the electrodynamic shaker and improves low frequency/high displacement performance of the overall system. This solid trunnion and base configuration also limits potential problems associated with misalignment.

Specifications of Option Sliptable_ATMARS.jpg

Oil Film

The precision surfaced magnesium plate rides on a film of oil which is circulated by a low pressure pumping system. The oil film provides a low friction surface and acts as a damping medium for restraint of resonances, pitch, yaw and roll moments. A standard relief valve directs non-required oil out of the pump back to the oil reservoir to increase pump life instead of re-circulating within the pump at temperature. A rubberized dirt shield forms the outer edge of the slipplate to prevent foreign matter from contaminating the oil and the oil from splashing out.

Linear Guide Bearing

This concept combines a standard slip table assembly with hydrostatic bearings to provide high restraint to pitch, yaw and roll moments, while preserving the damping characteristics of an oil film. This system allows testing of heavy products with high centers of gravity and is available with low or high pressure oil supply.

Custom fixtures can be designed and manufactured to meet unique customer requirements.


Hydrostatic Bearing Guide / V-Type Bearing Guide / Medium Pressure Bearing Guide

Bearing Guide_ATMARS.jpg

Power Amplifier

ATMARS modular power amplifier for the electrodynamic vibration shaker system is air-cooled and highly efficient to drive the shaker, field coils, blower unit and other ancillary components to full output capability over a user-specified frequency range. (Linear/Switching Power Amplifier)

A wide range of standard models for option

Machine base uses quality material, easy installation, stable operation, no foundation screws needed

Interference resistance circuit installed to resolve the interference of electromagnetic fields on the control circuit

Working time setting device makes sure accurate testing time

Ultra quiet working environment

Vibration Test Systems_ATMARS.jpg

Test Standards Conformance

GB/T 2423.14-1997

GB/T 2423.35-1986

GB/T 2423.36-1986

GB/T 2423.48-1997

GB/T 2423.49-1997

GB/T 2424.22-1986

GB/T 2424.24-1995

Electrodynamic Shaker and Vibration Test System Supplier_ATMARS.jpg

Your call is very important to us.

+86 769 22210691