Temperature Humidity Chambers

Drive in / Walk in Chambers

HALT HASS / ESS Chambers

Thermal Shock Chambers

Altitude Chambers

AGREE Vibration Chambers

Stability Chambers

Speciality Climatic Chambers

Vibration Test Systems

Mechanical Testing Equipment

Battery Testing Equipment

Laboratory / Industrial Ovens

Equipment
Home >  Equipment > Drive in / Walk in Chambers

AWTH-6B

ATMARS's Environmental Rooms are testing equipments that provide temperature or combined temperature and humidity options. Custom Walk in Envirormental Room models can be configured to meet any test environment required.

Equipment introduction
Related equipment

What is a Walk-In Chamber?

Walk-In Chambers from ATMARS serves as a ideal test site for large components, assemblies, and finished products. We manufacture both Panel (modilar) Walk-In Chambers and Solid (welded) Walk-In Chambers and can be configured as a temperature chamber or a temperature humidity chamber. A Panel Walk-In Chamber is made from lightweight insulated panels for fast and easy installation.


AWT/AWTH Configurations:

AWT Series - Temperature only

AWTH Series - Temperature and humidity capability


Available in FOUR standard temperature ranges:

Type A: -20℃ to +150℃

Type B: -40℃ to +150℃

Type C: -60℃ to +150℃

Type D: -70℃ to +150℃


Standard humidity range: 20%RH to 98%RH


Specifications of Walk-in Environmental Chamber AWTH-6B_ATMARS.jpg


Test Standards Conformance

GB/T 10586-2006 Specifications for damp heat chambers

GB/T 10592-2008 Specification for low/high temperature test chambers

GB/T 2423.1-2008 Environmental testing - Part 2: Test methods - Tests A: Cold

GB/T 2423.2-2008 Environmental testing - Part 2: Test methods - Tests B: Dry heat

GB/T 2423.3-2016 Environmental testing—Part 2: Testing method—Test Cab: Damp heat,steady state

GB/T 2423.4-2008 Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12h+12h cycle)

GB/T 2423.22-2012 Environmental testing - Part 2: Tests methods - Test N: Change of temperature

GJB 150.3A-2009 Laboratory environmental test methods for military material - Part3: High temperature test

GJB 150.4A-2009 Laboratory environmental test methods for military material - Part4: Low temperature test

GJB 150.9A-2009 Laboratory environmental test methods for military material - Part9: Damp heat test

IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold

IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat

IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature

IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

IEC 60068-2-78:2012 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state


Environmental Room with Controlled Temperature Humidity_ATMARS.jpg

Your call is very important to us.

+86 769 22210691