Temperature Humidity Chambers

Drive in / Walk in Chambers

HALT HASS / ESS Chambers

Thermal Shock Chambers

Altitude Chambers

AGREE Vibration Chambers

Stability Chambers

Speciality Climatic Chambers

Vibration Test Systems

Mechanical Testing Equipment

Battery Testing Equipment

Laboratory / Industrial Ovens

Equipment
Home >  Equipment > Drive in / Walk in Chambers

AWTH-8

Walk-in Climatic Test Chambers from ATMARS are designed for precise simulating, monitoring and control of temperature and humidity conditions required for long term environmental tests. We create custom walk-in cahmbers to fit your needs.

Equipment introduction
Related equipment

What is a Walk-In Chamber?

Walk-In Chambers from ATMARS serves as a ideal test site for large components, assemblies, and finished products. We manufacture both Panel (modilar) Walk-In Chambers and Solid (welded) Walk-In Chambers and can be configured as a temperature chamber or a temperature humidity chamber. A Panel Walk-In Chamber is made from lightweight insulated panels for fast and easy installation.


AWT/AWTH Configurations:

AWT Series - Temperature only

AWTH Series - Temperature and humidity capability


Available in FOUR standard temperature ranges:

Type A: -20℃ to +150℃

Type B: -40℃ to +150℃

Type C: -60℃ to +150℃

Type D: -70℃ to +150℃


Standard humidity range: 20%RH to 98%RH


Specifications of Walk-in Environmental Chambers AWTH-8 Series_ATMARS.jpg


Test Standards Conformance

GB/T 10586-2006 Specifications for damp heat chambers

GB/T 10592-2008 Specification for low/high temperature test chambers

GB/T 2423.1-2008 Environmental testing - Part 2: Test methods - Tests A: Cold

GB/T 2423.2-2008 Environmental testing - Part 2: Test methods - Tests B: Dry heat

GB/T 2423.3-2016 Environmental testing—Part 2: Testing method—Test Cab: Damp heat,steady state

GB/T 2423.4-2008 Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12h+12h cycle)

GB/T 2423.22-2012 Environmental testing - Part 2: Tests methods - Test N: Change of temperature

GJB 150.3A-2009 Laboratory environmental test methods for military material - Part3: High temperature test

GJB 150.4A-2009 Laboratory environmental test methods for military material - Part4: Low temperature test

GJB 150.9A-2009 Laboratory environmental test methods for military material - Part9: Damp heat test

IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold

IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat

IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature

IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

IEC 60068-2-78:2012 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state


Walk in Test Chambers for Environmental Stability Test_ATMARS.jpg

Your call is very important to us.

+86 769 22210691