Temperature Humidity Chambers

Drive in / Walk in Chambers

HALT HASS / ESS Chambers

Thermal Shock Chambers

Altitude Chambers

AGREE Vibration Chambers

Stability Chambers

Speciality Climatic Chambers

Vibration Test Systems

Mechanical Testing Equipment

Battery Testing Equipment

Laboratory / Industrial Ovens

Home >  Equipment > AGREE Vibration Chambers


AGREE Vibration Chambers from ATMARS can perform temperature and humidity testing with vibration testing for great ROI. An ATMARS engineer can assist you in selecting the AGREE chamber configuration and size that is for your testing requirements.

Equipment introduction
Related equipment

What is an AGREE CHAMBER ?

AGREE chambers are environmental test chambers that combine temperature and humidity testing (optional) with vibration testing. They are capable of generating rapid temperature changes, reproducing a variety of humidity levels and can become vibration chambers when seamlessly integrated with an electrodynamic shaker or repetitive shock vibration table. Such a design diversifies the chamber's utility because it can be used not only as a standalone temperature environmental chamber but also for combined environmental testing. 

The AGREE method of testing is an acronym for The Department of Defense Advisory Group on Reliability of Electronics Equipment. Originally designed for the defense and aerospace industry to perform temperature, humidity, and vibration tests conforming to MIL-STD 781 and 883, but now more generally used in many other industries.

ATMARS AGREE Test Chambers provide the flexibility to adapt to your ever-changing environmental testing and industry requirements. Our AGREE chambers are available in temperature-only or temperature and humidity configurations with mechanical, electrodynamic and dual axis vibration systems. And rapid thermal change rates of 1°C/min. up to 30°C/min. (average or linear temperature change rate) are available.

Our ATVH series AGREE Vibration Chambers have been adapted to perform reliability, qualification and Environmental Stress Screening (ESS) for a wide range of industries, such as electronics, defense, aerospace, automotive, telecommunications, batteries and so on.

- Peformance of AGREE Vibration Chamber Model AFTVH-1200C-10

Workspace Volume: 1200L

Workspace Dimensions: W1000xH1000xD1200mm

Temperature Range: -50 to +150 ℃

Temperature Change Rates: 10℃/min (Average)

Optional Humidity Range: 20% RH~98% RH (Lower humidity is available.)

Vibration Test System: Custom

Specifications of AGREE Chamber AFTVH-1200C-10.jpg

- Benefits & Features

Combined structure of test chamber and refrigeration system in one which is compact, beautiful and easy to operate

Water cooled cooling system with semi-hermetic compressor.

Touch screen controller with USB, RS-485 or RS-232 communication interface.

Combined testing purposes for greater ROI.

Flexible design & use with existing vibration shaker for your testing needs.

Simulates up to three environments (temperature, humidity and vibration) in one chamber.

Fast thermal change rates for accelerated stress testing.

According to customers' requirements vibration table models are optional.

The sealing of cold, heat and steam assured and so does to good mechanical transmission of vibration table.

AGREE Vibration Chambers for Thermal Vibration Testing_ATMARS.jpg

- Test Standards Conformance

GB/T 10586-2006 Specifications for damp heat chambers

GB/T 10592-2008 Specification for low/high temperature test chambers

GB/T 2423.1-2008 Environmental testing - Part 2: Test methods - Tests A: Cold

GB/T 2423.2-2008 Environmental testing - Part 2: Test methods - Tests B: Dry heat

GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab: Damp heat,steady state

GB/T 2423.4-2008 Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic ( 12h+12h cycle)

GJB 150.3A-2009 Laboratory environmental test methods for military material - Part3: High temperature test

GJB 150.4A-2009 Laboratory environmental test methods for military material - Part4: Low temperature test

GJB 150.9A-2009 Laboratory environmental test methods for military material - Part9: Damp heat test

IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold

IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat

IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature

MIL-STD, ASTM, JEDEC, Telcordia and other test standards.

Your call is very important to us.

+86 769 22210691